VS Winchester WiFly V2 Bodyboard
VS Winchester WiFly V2 Bodyboard
VS Winchester WiFly V2 Bodyboard

VS Winchester WiFly V2 Bodyboard

The VS Winchester WiFly V2 Bodyboard comes in a PFS-T core with a C3 Trinity Concave

This design is meant to be ridden 1/2” longer than a normal board. If you normally ride a 41.5”, you ride a 42” WiFly V2. On the WiFly V2 the tail is extended to give more volume. The extended 1/2” length is vitally important to how this board performs. 

Available sizes for VS Winchester WiFly V2:  (order half size up)

41.5” (41” template + 1/2” tail extension)
42” (41.5” template + 1/2” tail extension)
43” (42.5” template + 1/2” tail extension)
44” (43.5” template + 1/2” tail extension)

PFS-T

Incorporating our patented PFS™ technology, the WiFly V2 features an angled beam setup. Running from the tip of the Deep V Tail, toed-in towards the nose, it made total sense to us that by aligning the PFS beams directly in-line with the hip, elbow and hand, it would allow for greater loading of the beams during turns and therefore more recoil/ projection when pressure is released.

C3 TRINITY CONCAVE Design

A single concave from wide-point to tail is integrated with a double concave running along the inside edge of the tapered PFS beams. Designed to keep the board on rail, with better release for quicker directional changes.

TRINITY CONCAVE
A full rail to rail concave from wide-point to tail is integrated with a double concave running along the inside edge of the towed PFS beams. Designed to keep the board on rail, with better release for quicker directional changes.

PFS-T CORE
Incorporating our patented PFS technology, the WiFly V2 features the all new towed-in beam setup. Running from the tip of the Deep V Tail, angling in towards the nose, it made total sense to us that by aligning the PFS beams directly in-line with the hip, elbow and hand, it would allow for greater dynamic loading of the beams during turns and therefore more recoil/ projection when pressure is released. Precision cut with @akushaper

DEEP V TAIL
Building on what we learnt from the WiFly V1, we’ve gone even more extreme with the Deep V Tail design. We moved the tips closer to the rail and incorporated the hydrodynamic flow from the double concave for more positive traction during bottom turns and lip drives. We also added more volume to the tail area by extending the tips. With this in mind the WiFly V2 is designed to be ridden 1/2” longer than your normal Crescent tail board length. So if you normally ride a 41.5” Crescent, we recommend you ride the 42” WiFly V2. 
Note: On a 42” WiFly V2 the nose width and wide-point are exactly the same as on a 41.5” Crescent, but we’ve extended the tail in @shape3d CAD software adding an extra 1/2” to the finished length.
 

VS Winchester WiFly V2 Bodyboard